Remove wheel arch top plate on left-hand side of car.
Drill hole for aerial in left side section, cf. fitting of retracting
radio aerial (telescopic) 65 21 100.
Lift up part of carpet and drill hole for aerial cable into
side panel.
a = 75 mm (2.95280")
b = 75 mm (0.98425")
Fit on rubber bush.
Drill hole for control wire and power supply cable.
c = 30 mm (1.1811")
Fit on rubber bush.
Remove support for lock of luggage compartment lid and
take off cover.
Remove sealing plugs from pre-drilled boreholes.


65 21 100

Drill holes for aerial support.
a = 95 mm (3.7402")
b = 130 mm (5.1181")
Fasten aerial support by means of sheet metal bolts.
Fasten rubber elements onto aerial and build in aerial.
Lay cables through rubber bushes into passenger compartment.

Connect control wire (1) with the receiver.
Connect cable (2) with earth.
Connect cable (3) with fusebox fuse 5.
Connect aerial cable.