Open the pressure valve on the compressor.
Drain the coolant.
Warning: Observe safety precautions.
When installing: Evacuate and refill the system
(64 50 009).
Unscrew the coolant lines.
When installing:
a) Coat threads with low temperature resistant oil.
b) Do not re-use copper sealing rings.
Warning: Plug the coolant lines immediately after
disconnecting, to prevent moisture from entering the
dehumidifier and rendering it inoperative.


64 50 009

Loosen the screws on the swivel plate.
Take off the V-belt.
Unscrew the compressor from the swivel plate.
Break the electrical connections.
Remove the compressor downwards.