Unscrew the heater cover plate.
When installing: Place the Terostat sealing cord (A) between
the cover plate and the windshield surround.

Lift out the mesh grid over the blower.
Pull off the cable connectors.

Unscrew the motor mounting from the housing and pull
out diagonally upwards.

Release the retaining clips.
Pull the motor away from its mounting.
When installing: The shorter end of the clip should be
pressed over the motor mounting.
Warning: Do not pull the blower off the motor shaft as
both components have been balanced together.
Replace the motor only in unit with the blower.