Remove cover plate for heater unit.
When installing: Place a Terostat strip (A) between
the cover plate and the water drain gutter.

Pull off the wiper arms.
When installing: Push on the wiper arms so that the
distance of the blades to the rubber front windshield
surround in the parked position is app. 1 - 2 cm
(0.4 - 0.8).

Loosen the left and right wiper pivot bearings.
Swing out the wiper motor with complete linkage.
Pull the multi-pin plug away from the plug board and
remove complete with rubber grommet.
Press off the connecting link and the drive rod.
Unscrew the wiper pivot bearings.