Pull off the hub cap.
Loosen the wheel nuts.
Note: The wheel has been electronically balanced. Before
removing mark wheel position in relation to rear axle
shaft.

10350001 - click to zoom
 
Raise the car below the rear axle beam and final drive.
Place a wooden packing piece 50 x 7 x 3.5 cm
(20 x 2.75 x 1.4 in.) on the jack or hoist lifting pad.

10350002 - click to zoom
 
Support the body on a stand with wooden packing piece
interposed.

10350003 - click to zoom
 
Sketch for making up wooden packing pieces (hardwood).
These can be prepared in your own workshop.

10350004 - click to zoom