Remove ari filter housing, cf. 13 71 000.
Loosen lock bolt on accelerator bar.
Disconnect push bar from ball swivel joint.
Pull accelerator bar off accelerator lever arm.
Note when assembling: Note assembly position of spacer
sleeve and shims.


13 71 000

Note when assembling: Note assembly position of accelerator
bar (1). To adjust position, check basic measurement
(A)¹) of brake pedal and also adjust if necessary,
cf. 35 21 000.
Check length of push bar (D)¹) and connection bar (E)¹)
and adjust if necessary. Adjust accelerator pedal to basic
measurement (C)¹) and fit on accelerator bar (1) with push
bar already connected.


¹) See specifications
35 21 000