Remove cover = dashboard at bottom middle left, cf. 51 45 190. Disconnect return spring for clutch pedal. |  |
 |
|
Remove hazard warning flasher relay and place at side. |  |
oosen lock nut on bearing bolt. Pull out bearing bolt. Note when assembling: Note correct tightening torque¹). Press clutch pedal down diagonally and take out tightfit bolt. Check bushes for wear, replace if necessary and apply Longterm 2 grease.  ¹) See specifications.
|  |
Remove clutch pedal. Note when assembling: Check bearing bush for wear, replace if necessary and apply Longterm 2 grease. Check basic measurement (B)¹) and adjust piston bar if necessary. Check rubber stop and replace if necessary. ¹) See specifications.
|  |
