Disconnect the hoses form the high pressure pump.
Warning: Do not re-use automatic transmission fluid escaping from
the pump and hoses.
Detach the high pressure pump from the rear mounting.
Note when installing: Secure the high pressure hose in such a way
as to prevent friction against the engine mounting.

Detach the high pressure pump at the front.
When installing: It should be posible to press in the V-belt by
5 ÷ 10 mm (0.2 ÷ 0.4in.) with the thumb.
Bleed the hydraulic system (32 13 006).


32 13 006