The following requirements must be fulfilled before any axle alignment work:
1. Good, even tyre treads.
2. Specified tyre pressures.
3. Perfect condition wheel rims
4. Specified wheel bearing play.
5. Car in normal position (see Page 32-0/3).

Determine actual values an optical tester.
Fill in check sheet.
See "Technical Data" for reference values.

Troubleshooting:
5 Camber incorrect
a) defective rear axle beam rubber mount
b) defective rear axle final drive rubber mount
c) defective silentblocks in control arm
d) rear axle beam distorted
e) control arm distorted
f) distortion in floor assembly

6 Rear wheels misaligned
a) rear axle beam displaced to one side
b) distortion in floor assembly

7 Track incorrect
a) rear axle beam distorted
b) control arm distorted
c) defective silentblocks in control arm
d) defectife rear axle beam rubber mount
e) excessive spring deflection