- ZF gearbox S 4-18/3 -
Push up bellows and foam insert.
Take out circlip.

Pull out gearshift lever.
Note when assembling: Fit in gear lever ball with Longterm
2 grease.

- Getrag gearbox 262 -
Push up bellows and foam insert.
Take out circlip.
Screw out threaded bolt (1).
Press out cylindrical stud (2).
Note when assembling: Apply Longterm 2 grease on
bearing bushes.
Check sliding sleeves for wear and replace if necessary.
Secure cylindrical stud in centre bore by means of threaded
bolt.

Pull out gear shift lever.
Note when assembling: Fit in gear lever ball with Long-
term 2 grease.