Detach connecting rod.
Disconnect multiple plug.
Take off selector lever switch.
Remove speedometer shaft.
Remove control unit - see 24 30 000.
Remove angled lever (1) with torsion spring (2).


Siehe auch 24 30 000
34001001 - click to zoom
 
Note when fitting: Be careful to install the angled lever (1),
torsion spring (2) and cam (3) properly.

34001002 - click to zoom
 
Take off cover (4).
Pull shaft (5) with M 6 screw out of housing.
Note when fitting: Replace oil seal (6).

34001003 - click to zoom
 
Take out pawl (7) with washer (8) and torsion spring (9).

34001004 - click to zoom