Remove oil pan - see 24 11 000.
Remove oil pipes (1 through 5) with tool 7033.
Caution! Be careful not to bend pipes.


Siehe auch 24 11 000 b
30000b01 - click to zoom
 
Detach accelerator cable.

30000b02 - click to zoom
 
Remove control unit.
Note when fitting: Short screw faces converter housing
(right hand side in Fig.).

30000b03 - click to zoom
 
Note when fitting: Check the fit of the following pipes for
tightness:
Pump suction pipe (1).
Converter feed pipe (2).
Pump pressure pipe 83).

30000b04 - click to zoom
 
Note when fitting: Guide pin on selector lever into groove
in manual selector valve.
Press the control unit against the transmission case and
tighten.

30000b05 - click to zoom