Remove oil pan - see 24 11 000.
Remove guide plate (1).
Remove control unit.


Siehe auch 24 11 000
30000001 - click to zoom
 
Note when fitting: Place throttle pressure piston against
throttle cams. Guide operator on pawl into selector valve
groove.

30000002 - click to zoom
 
Note when fitting: Move throttle pressure piston to full
throttle position with accelerator pedal. Adjust control
unit until gauge 7056 can be fit snugly between control unit
housing and throttle pressure piston.
Tighten control unit in this position.

30000003 - click to zoom