A) Outside throwout arm
Push back sleeve (1).
Lift out circlip (2).
Pull out slave cylinder forwards.
Draw off brake fluid from reservoir down to connection
or filler pipe.

52010001 - click to zoom
 
When installing: Coat ball face of pushrod with Molykote
Longterm 2.
Note anti-rotation lock.
Detach and attach pressure hose.
When installing: Bleed clutch hydraulic system 21 00 006.


Siehe auch 21 00 006
52010002 - click to zoom
 
B) Inside throwout arm
Unscrew pipe (1) at clutch slave cylinder. Unscrew nuts
and take off slave cylinder.
When installing: Insert pushrod at front coated with Moly-
kote Longterm2.
Note correct tightening torpue¹.
Bleed clutch hydraulic system 21 00 006.



Siehe auch 21 00 006
Siehe auch See Technical Data
52010003 - click to zoom