So that the throttle valve cannot stick there must be a clearance -
a hairline gap - between the throttle valve and bore.
Loosen nut (1). Loosen screw (2) until there is play at stop (3). Tighten
screw (2) up to stop (3). Let the operating lever accelerate back several times.
Tighten screw (2) by 1 turn and tighten nut (1).
Adjust throttle valve switch - see 13 63 544.
Adjust engine idle speed - 13 00 054.


Siehe auch 13 63 544
Siehe auch 13 00 054
63534001 - click to zoom