Disconnect minus cable form battery.
Remove intake air collector cf. 11 61 050.
Remove pressure regulator and support (1) from intake manifold.


Siehe auch 11 61 050
61310001 - click to zoom
 
Pull flag plug off injection valves.
Note: Do not pull at the cables.
Remove injection valves 4 ÷ 6. Circular pipe must remain connected.
Note when fitting: Always replace samll rubber sealing ring (A).
Note: Be careful not to damage jet nozzles.

61310002 - click to zoom
 
Pull flat plugs (1) and (2), cable (3) at plug connection, and cables
4 ÷ 6 off starter or disconnect.
Note: Do not pull at the cables.
Note when fitting:

red terminal 50
black terminal 30

61310003 - click to zoom
 
Pull out cables sleeve with part of loom.

61310004 - click to zoom
 
Unscrew bolt (7) and remove intake manifold from cylinder head.

61310005 - click to zoom
 
Take off intake manifold.
Note when fitting: Replace sealings.

61310006 - click to zoom